Temper is a compact temperature sensor based on ESP8266 and SHT30 with large 13x7 pixel led display.
SHT30 full-featured driver library for general-purpose MCU and Linux.
Air quality modules with Nordic nRF52840. Thread network (OpenThread). TheThingsIO. Sensirion. SPEC Sensors. ST Microelectronics.
Low-cost sensor node device using solar energy and a sx1276 LoRa transmitter for a Wireless Sensor Network.
A micropython project for wemos d1 mini with wemos SHT30 sensor publishing values to an influxdb instance
Arduino sketch for ESP8266 to report temperature/humidity from a SHT30 sensor to an MQTT server
Temperature & humidity sensor Thing using ESP8266 + MQTT + SHT30. Built with PlatformIO and Homie
Micropython modules for the M5Stamp C3U
A micropython project for wemos d1 mini with wemos SHT30 sensor using mqtt as transport
Extended version of a WiFi Cloud Controller based on ESP8266 and Blynk, works with BME280, SHT3x, HTU21, DS18B20 probes for controlling temperature, humidity or both.
Display temperature and humidity on ePaper without flashing
A MicroPython application written for an ESP32 microcontroller, used for reading environmental data from DHT22, BME280, SHT30, ENS160, or PMS5003 sensors, or distance from a VL53L1X, and sending the r...
Household temperature and humidity monitoring based on Tuya Smart
Weather station with remote sensors and TFT color display
MicroPython driver for the SHT31 Temperature and Humidity Sensor
Measure temperature and humidity with the Sensiron SHT3x sensor.