rtl_433 是通用数据接收器,主要用于 433.92 MHz、868 MHz (SRD)、315 MHz、345 MHz 和 915 MHz ISM 频段。
My Old Home Assistant Config. For more Information visit ->
433MHz temperature and humidity sensor receiver that integrates with home automation systems.
Open the Tesla charge door with an Arduino and an ASK STX882 transmitter
ESPiLight - pilight 433.92 MHz protocols library for Arduino
Arduino Uno, 433MhzRx and OS WMR86 Weather Station
A small Arduino library for using 315MHz / 433MHz RF modules with ATtiny13 and other low-memory microcontrollers.
Automate gate/garage door opening via 433.92MHz emitter with Raspberry Pi, Home Assistant and Homekit.
nodejs modul with protocol support for different 433mhz switches and weather stations for the RFControl Arduino library.
Arduino library for TI CC1101. Supports the latest Arduino IDE and Platformio. Tested with AVR atmega328, stm32f103, nodeMCU and probably works with a lot more.
🔑This is a small project about an RF module for an Arduino. This module can transmit at 433 MHz, which can be used to jam or disable a car key. ❗This project is for educational and informational purp...
RF (433Mhz) to MQTT Bridge - with hardware
Linux device driver for the Texas Instruments CC1101 radio